manualshive.com logo in svg

Beckmann EMS 133 E, Product Deion & Operating Manual, Page: 15 / 38

Share
Download
Beckmann EMS 133 E Product Deion & Operating Manual Download Page 15

Product Description & Operating Manual EMS 13x / 23x / 33x 

Beckmann GmbH © 2001 

 

Page 15 

As long as the maximum time has not yet been reached, additional time can be vended during the 

delayed start phase with coins or with an additional card. As soon as the maximum time has been 

reached, the vending interval display disappears from the middle of the second display line. 

 

30.00 € = 30.0 Min 

OK

↓

                   STOP

↓

 

If the purchase has been confirmed by pressing the green key, the display shows the following: 

 

30.00 € = 30.0 Min 

MAXIMUM REACHED 

 
The device is now in the delayed start phase. The tanning starts as soon as the customer presses 
the remote start switch, or as soon as the delayed start time is over. 
 

TANNING 

29.9 Min 

 
The display shows the remaining tanning time. As soon as the tanning is over with, the cool 
down phase starts. The display shows the following: 

 

COOLING 

0.9 Min 

 
 

 

2.3  PIN-CARD recharge with coins 

If you have set the card recharge parameter (M3N13) (see section 3.2 p.18 ) to a value other than 
zero (i.e. 100 €), and a customer inserts a card with a remaining credit less than this parameter 
(i.e. 50 €), then the customer can charge his card with coins. The display shows the following: 
 

CHARGE     50.00€ 

           5+

↓

      STOP

↓

 

The customer can 

• 

charge his card by inserting coins or, 

• 

start purchasing time for the device by pressing the white key. This then happens exactly as 
described in chapter 2  „Time vending with the EMS timers“. 

Summary of Contents for EMS 133 E







































Reviews:

No comments