Beckman Coulter UniCel DxH 800, Instructions For Use Manual

Page: 18 / 32

PN: B02684AA (August 2011)
Professional Development
Configure Diluent Containers
Step Action
1
You can configure the system to run with one diluent container, or two (dual) diluent
containers. The system will automatically switch between two containers if so
configured.
Select the Supplies Icon > Configure Containers .
2
You may select either the Single Container or Dual Container option from the
Diluent drop-down list.
3 Select the OK button to save your selection.
Configure Low Level Condition
Step Action
1
The Configure Low Level option allows you to set a warning level to alert you when
a supply is running low based on the remaining percentage of that supply.
Select the
Supplies Icon > Configure Low Level .
2
Select a Percentage from the drop-down list.
Note: When the low level is triggered Supplies Alert Status Icon turns yellow. If both
supplies are out, the icon is red.
3 Select OK .