Beckman Coulter Avanti JXN-26, User Manual

Page: 152 / 210

PN B38322AA 6-58
Functional Pages
Zonal Operation Page
Zonal Operation Page
Figure 6.62 Zonal Operation Page
Enter the correct authorization code from the Zonal Authorization Page to display the
Zonal
Operation
page and enter Zonal mode.
When you use Zonal mode, the
Zonal Operation
page replaces the Home Page until Zonal mode ends.
In addition to the Header Bar and the Footer Bar, the
Zonal Operation
page contains the following
elements:
•
As a display, the
Status
Display/Buttons show the current step in the Zonal or Continuous Flow
run procedure. Once a run has started, the
Loading, Running, and Unloading
buttons become
active and are used to move between Zonal process steps. See Zonal and Continuous Flow
Operation in CHAPTER 3, Operations for additional details.
•
As a display, the
Load Speed
Display/Button shows the sample loading speed. Use the arrow
buttons above and below to increase or decrease the sample loading speed, or select the button
to enter the sample loading speed using the keypad.
• As a display, the
Run Speed
Display/Button shows the sample running speed. Use the arrow
buttons above and below to increase or decrease the sample running speed, or select the button
to enter the sample running speed using the keypad.
•
As a display, the
Unload Speed
Display/Button shows the sample unloading speed. Use the
arrow buttons above and below to increase or decrease the sample unloading speed, or select
the button to enter the sample unloading speed using the keypad.
• The
Slow to Zero RPM
button is for preliminary steps which require bringing the rotor to a stop
temporarily during the initial loading adjustments. The button brings the rotor to a stop
without exiting Zonal mode.