Installation
2-4
To ensure safety, the centrifuge should be wired to a remote emergency
switch (preferably outside the room where the centrifuge is housed, or
adjacent to the exit from that room), in order to disconnect the instrument
from the main power source in case of a malfunction.
WARNING
!
To reduce the risk of electrical shock, this equip-
ment uses a three-wire electrical cord and plug to
connect the centrifuge to earth-ground. To
preserve this safety feature:
• Make sure that the matching wall outlet
receptacle is properly wired and earth-
grounded. Check that the line voltage agrees
with the voltage listed on the name rating
plate affixed to the centrifuge.
• Never use a three-to-two wire plug adapter.
• Never use a two-wire extension cord or a
two-wire non-grounding type of multiple-
outlet receptacle strip.
TEST RUN
➠
NOTE
The centrifuge must be plugged in and the power
switch turned to on position (
I
) before the door can
be opened.
We recommend that you make a test run to ensure that the centrifuge is in
proper operating condition following shipment. See Section 3 for instruc-
tions on operating the centrifuge.
After completing the test run, return the pre-addressed warranty card
included with this literature. This will validate the centrifuge warranty and
ensure your receipt of further information regarding new accessories and/
or modifications as they become available.
