Overview
PS2031-2410-0000
5
Version: 1.0
1
Overview
PS2031-2410-0000 | Power supply 24 V, 10 A, 3-phase, Extra Power
• 3AC 380-480V wide-range input
• 2- or 3-phase operation possible
• Width only 62mm
• Efficiency up to 92.9% thanks to synchronous rectifier
• Excellent part-load efficiency
• 120% peak power, 288W
• Precise triggering of fuses through high overload / peak current
• Integrated input transient suppression circuit
• Minimum inrush current surge
• 3 integrated input fuses
• Current-sharing function for parallel use
• Full output between -25°C and +60°C
The PS2031-2410-0000 is a 3-phase 24 V power supply unit with an output current of 10 A and an output
power of 240 W.
On the input side, the device features a wide-range input, harmonic correction (PFC) and inrush current
limitation.
The PS2031-2410-0000 features an Extra Power output with a continuous maximum output power of 120%
and is able to trigger fuses precisely with a short-term peak current.
The power supply unit is part of the PS2000 family and has a width of 62 mm. A DC OK LED monitors the
status of the output voltage
Overview of technical data
*)
Overview of technical data
PS2031-2410-0000
Output voltage
DC 24V (nominal factory setting 24.1V)
Adjustment range
24 - 28V
Output current
12.0-10.3A (amb. below +45°C)
10.0-8.6A (amb. at +60°C)
7.5-6.5A (amb. at +70°C)
Linear load reduction b45°C and +70°C
Input voltage AC
3AC 380-480V -15%/+20%
Mains frequency
50-60Hz ±6%
Input current AC
0.7 / 0.6A at 3x400 / 480Vac
Efficiency
92.8 / 92.9% at 3x400 / 480Vac
Temperature range
-25°C to +70°C
Size (W x H x D)
62 x 124 x 117mm (without DIN rail)
Weight
750 g
Approvals/markings
CE
cULus
EAC
*) All values typical for 24 V, 10 A, 3x 400 Vac, 50 Hz, symmetrical mains voltages, 25°C ambient temperature and after a warm-up
time of five minutes, unless otherwise stated
