Beckhoff KL2532 Documentation Download Page 7

Page: 7 / 65

Foreword

KL2532/KS2532, KL2552/KS2552

Version: 3.2.0

1.3

Documentation issue status

Version

Comment

3.2.0

• Update chapter Instructions for ESD protection

• Chapter “Beckhoff Identification Code (BIC)” added

3.1.0

• Update chapter "Notes on the documentation"

• Update chapter "Technical data"

• Chapter "Instructions for ESD protection" added

• Update chapter "Connection system" -> "Connection"

• Chapter "Installation instructions for enhanced mechanical load

capacity" added

• Chapter "Prescribed installation position" replaced with chapter

"Installation position with or without fan)"

• Update revision status

• Chapter "UL notice - Compact Motion" added

3.0.0

• Migration

• Update revision status

• Update structure

2.6.0

• LED displays of the KL2532/KS2532 updated

• Technical data updated

2.5.0

• Technical data updated

• Register overview corrected

• Register description expanded

2.4.0

• Basic function principles updated

• Register description expanded

• Technical data updated

• Mounting instructions updated

2.3.0

• Technical data updated

2.2.0

• Mounting instructions updated

2.1.0

• Introduction for KL2552 updated

• Register description updated

• Notes on connection methods extended

2.0.0

• KL2532 added

• Notes on connection methods added

1.1.0

• Register description expanded

• Description of the KS2000 configuration software expanded

• Description of KL2552-0005 added

• Technical data updated

• Description of chopper mode added

• Application example added

1.0.0

• English translation published

• Minor layout corrections

0.2

• Basic function principles added

• Description of control and status byte extended

• Register description corrected

0.1

First provisional documentation for KL2552-0000

Summary of Contents for KL2532


































































Search results

Summary of Contents for KL2532

Reviews:

Related manuals for KL2532

Brands by name

Popular brands

Beckhoff KL2532, Documentation

Search results

Summary of Contents for KL2532

Reviews:

Related manuals for KL2532

Brands by name

Popular brands