background image

Commissioning and configuration

EP4374

28

Version: 2.3

4

Commissioning and configuration

4.1

Configuration in TwinCAT

An EtherCAT Box must be configured in TwinCAT so that its functions can be used in a PLC program.

The following link will take you to a quick start guide describing the configuration of an EtherCAT Box in
TwinCAT:

https://infosys.beckhoff.com/content/1033/epioconfiguration/index.html?id=6991403443235907429

4.2

Parameterize signal ranges

Note

 An incorrect signal range can cause damage to devices. Parameterize the signal ranges

according to the specifications of connected devices.

The signal range can be individually parameterized for each analog input and output. The parameters that
define the signal range are located in the CoE directory:

Interface

CoE Index

Analog input "1"

F800:01

Analog input "2"

F800:02

Analog output "3"

F800:03

Analog output "4"

F800:04

TwinCAT

Proceed as follows to change the signal range of an analog channel in TwinCAT:

1. Double-click the IO module EP4374-0002 in the IO tree.

2. Click on the "CoE - Online" tab.

ð

The CoE directory is displayed

3. Search the CoE directory for the index F800:0.

4. Click on the "+" symbol to the left of Index F800:0.

ð

The sub-indices of F800:0 are displayed.

5. Double-click on the subindex of the interface whose signal range you want to change.

ð

A dialog box "Set Value Dialog" opens.

6. Select the signal range from the "Enum" drop-down menu.

Summary of Contents for EP4374






















































Reviews: