Beckhoff EL95 Series, Documentation

Page: 7 / 42

Foreword
EL95xx 7 Version: 2.2
2.3 Documentation issue status
Version Comment
2.2 • Update chapter "Technical data"
• Update structure
2.1 • Update chapter "Notes on the documentation"
• Update chapter "Technical data"
• Addenda chapter "Instructions for ESD protection"
• Addenda chapter "Installation instructions for enhanced mechanical load capacity"
• Chapter "ATEX - Special conditions" replaced with chapter "ATEX - Special conditions
(standard temperature range)"
2.0 • Migration
• Update structure
1.4 • Update "Technical data"
1.3 • Update "Technical data", connection diagram
1.2 • Note regarding firmware compatibility inserted
1.1 • EL9560 added
1.0 • First published
0.2 • Corrections and addenda
0.1 • Provisional documentation for EL95xx
2.4 Version identification of EtherCAT devices
Designation
A Beckhoff EtherCAT device has a 14-digit designation, made up of
• family key
• type
• version
• revision
Example Family Type Version Revision
EL3314-0000-0016 EL terminal
(12 mm, non-
pluggable connection
level) 3314 (4-channel thermocouple
terminal) 0000 (basic type) 0016
ES3602-0010-0017 ES terminal
(12 mm, pluggable
connection level) 3602 (2-channel voltage
measurement) 0010 (high-
precision version) 0017
CU2008-0000-0000 CU device 2008 (8-port fast ethernet switch) 0000 (basic type) 0000
Notes
• The elements mentioned above result in the technical designation . EL3314-0000-0016 is used in the
example below.
• EL3314-0000 is the order identifier, in the case of “-0000” usually abbreviated to EL3314. “-0016” is the
EtherCAT revision.
• The order identifier is made up of
- family key (EL, EP, CU, ES, KL, CX, etc.)
- type (3314)
- version (-0000)