background image

Product overview

CU8210-D001-0200

10

Version: 1.0

3

Product overview

With the CU8210-D001-0200 WLAN stick, Beckhoff Industrial PCs can be equipped with a WLAN module
and operated under Windows CE in client mode.

The WLAN stick offers the encrypted exchange of data at a transfer rate of up to 150 Mbit/s and supports
20 MHz and 40 MHz transmission bandwidths. The WLAN stick supports the IEEE 802.11 b/g/n
specifications. The WLAN stick is backward compatible and enables communication with older devices.

The WiFi Direct standard is not supported. This means that no connection can be established between two
WLAN end devices without a central access point.

3.1

Structure

Fig. 1: Structure of a CU8210-D001-0200 WLAN stick.

Table 1: Legend for the configuration.

No.

Component

Description

1

Diagnostic LED [

}

 18]

The LED is located under the plastic.

The diagnostic LED indicates the status of the WLAN stick and, for
example, whether the WLAN stick is switched on or is connected to
a network.

2

Name plate

The name plate can be used for the identification of the model. The
MAC address can be found here.

Summary of Contents for CU8210-D001-0200


























Reviews: