Operating Instructions
5 Operating Instructions
5.1 Switching the Control Panel on and off
5.1.1 Switching on
The Control Panel does not have its own mains power switch. As soon as the power supply is switched
on the Control Panel is activated.
5.1.2 Shutting down and switching off
Control software such as is typically used on Industrial PCs permits various users to be given different
rights. A user who may not close software may also not switch the Industrial PC off, since data can be
lost from the storage medium by switching off while software is running.
First shut down, then switch off!
Warning
If the Industrial PC is switched off as the software is writing a file to the storage
medium, the file will be destroyed. Control software typically writes something to the
storage medium every few seconds, so that the probability of causing damage by
switching off while the software is running is very high.
Switch off power supply
Warning
When you have shut down the Industrial PC, you have to switch off power supply for at
least 10 seconds before rebooting the system.
After resetting power supply the Industrial PC will start booting automatically.
5.2 Operation
The operation of the Control Panel occurs via the Touch Screen.
Risk of damaging the Touch Screen
Warning
The touch screen may only be actuated by finger tips or with the touch screen pen. The
operator may wear gloves but there must be no hard particles such as metal shavings,
glass splinters embedded in the glove.
Properly installation of the system and the multi-touch device
Warning
Capacitive Touch Screens use the functional principle of capacitive alternation of the
electrical field. Strong electrical fields can influence the functionality of the multi-touch
devices.
To ensure the correct function of the Touch Screen take care of a standardized
installation of all parts of the system and an EMC-environment conforming to
standards.
CP29xx
23
Summary of Contents for CP29xx-0000 Series
Page 2: ......
