Beckhoff CB3067, Original Manual

Page: 39 / 108

BIOS settings
CB3067 39 Version: 1.0
8.3.6 SCH3114 Super IO Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Main
Advanced Chipset Security Boot Save & Exit
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ SCH3114 Super IO Configuration │Set Parameters of Serial Port │
│ │1 (COMA) │
│ Super IO Chip SCH3114 │ │
│> Serial Port 1 Configuration │ │
│> Serial Port 2 Configuration │ │
│ ├────────────────────────────────┤
│ │→←: Select Screen │
│ │↑↓: Select Item │
│ │Enter: Select │
│ │+/─: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Reset │
│ │ESC: Exit │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Bios entry Options
SCH3114 Super IO Configuration
Super IO Chip
Serial Port 1 Configuration
Submenu see: Serial Port 1 Configuration [
}
39]
Serial Port 2 Configuration
Submenu see: Serial Port 2 Configuration [
}
40]
8.3.6.1 Serial Port 1 Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Main
Advanced Chipset Security Boot Save & Exit
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ Serial Port 1 Configuration │Change the Serial Port mode. │
│ │ │
│ Serial Port [Enabled] │ │
│ Device Settings IO=3F8h; IRQ=4; │ │
│ │ │
│ Change Settings [Auto] │ │
│ Device Mode [Normal] │ │
│ ├────────────────────────────────┤
│ │→←: Select Screen │
│ │↑↓: Select Item │
│ │Enter: Select │
│ │+/─: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Reset │
│ │ESC: Exit │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Bios entry Options
Serial Port 1 Configuration
Serial Port Enabled / Disabled
Device Settings None
Change Settings Auto / IO=3F8h; IRQ=4;…IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;
Device Mode Normal / High Speed