Connections
CB3067
18
Version: 1.0
6.7
Display port IPEX (P1001)
The CB3067 has a further DVI connection, which is implemented in the form of a 30-pin ribbon cable
connector. There are no analog VGA signals on this connection, but an HDMI or DisplayPort screen can be
connected. In addition, a further USB channel is fed out via this connector. This USB channel supports the
specification 3.0. It supplies up to 900 mA current and is electronically protected.
When cabling, be sure to connect receive cables with transmit cables and vice versa. The current drawn
from VCC must not exceed 2 A in total (0.5 A per contact); for 3.3 V, the maximum current is 1 A (0.5 A per
contact).
NOTE
Use IPEX cables!
Use a special I-PEX cable for this interface.
Fig. 8: CB3067 Display Port IPEX (P1001)
Pin assignment Display Port IPEX
Pin
Name
Description
1
TMDS0#/DP2#
DVI Data 0 - / DP Lane 2 -
2
TMDS0/DP2
DVI Data 0 + / DP Lane 2 +
3
TMDS1#/DP1#
DVI Data 1 - / DP Lane 1 -
4
TMDS1/DP1
DVI Data 1 + / DP Lane 1 +
5
TMDS2#/DP0#
DVI Data 2 - / DP Lane 0 -
6
TMDS2/DP0
DVI Data 2 + / DP Lane 0 +
7
TMDSCLK#/DP3#
DVI Clock - / DP Lane 3 -
8
TMDSCLK/DP3
DVI Clock + / DP Lane 3 +
9
N/C
Not connected
10
SEL_DVI/DP#
DVI-DisplayPort Select
11
DDCK/DPAUX
EDID Clock / DP Aux +
12
DDDA/DPAUX#
EDID Data / DP Aux -
13
VCC
5 V supply voltage
14
GND
Ground
15
HPD
Hot Plug Detect
16
USBVCC
USB supply 5 V
17
USBVCC
USB supply 5 V
18
N/C
Not connected
19
N/C
Not connected
20
SSRX-
SuperSpeed Receive -
21
SSRX+
SuperSpeed R
22
USB-
USB minus data channel
23
USB+
USB plus data channel
24
SSTX-
SuperSpeed Transmit-
25
SSTX+
SuperSpeed T
26
3.3 V
3.3 V supply voltage
27
3.3 V
3.3 V supply voltage
28
VCC
5 V supply voltage
29
VCC
5 V supply voltage
30
VCC
5 V supply voltage
