Beckhoff C9900-P223 Installation And Operating Instructions Manual Download Page 17

 

Appendix 

 

C9900-P223 / C9900-P224 

15 

Appendix 

 

Technical data 

Electrical data 

Input voltage:

 

22-30V DC/ 15A 

Power output:

 

max. 150W , depending on cooling 

Output voltages:

 see 

section 

Electrical data

 

 

 

Dimensions 

Dimensions (W x H x D):

  

50 x 25 x 104 mm

 

Weight:

 120 

 

Do not use the power 
supply unit in areas of 
explosive hazard 

The power supply unit must not be used where there is a risk of 
explosion. 

 

 

The following conditions must be observed during operation: 

Environmental conditions 

Ambient temperature:

  

0 to 55°C 

Atmospheric humidity:

 

Maximum 95%, non-condensing 

 

Shock resistance 

Sinusoidal vibration 
(EN 60068-2-6):

 

10 to 58 Hz:

 

0.035 mm 

 

58 to 500 Hz:  0.5 G (~ 5 m/ s

2

Impact 
(EN 60068-2-27/ -29):

 

5 G (~ 50 m/ s²), duration: 30 ms 

EMC compatibility  

Resistance to interference:

 according to EN 61000-6-2 

 

Emission of interference:

  according to EN 61000-6-4 

Transport and storage 

The same values for atmospheric humidity and shock resistance are to be 
observed during transport and storage as in operation. The shock 
resistance during transport can be improved by appropriate packaging of 
the power supply unit. The ambient temperature during storage and 
transport must be between -20°C and +65°C. 

 
 
 

Approvals

 

 

FCC: Federal Communications Commission 
Radio Frequency Interference Statement

 

FCC Approval for USA 

This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This 
equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in 
which case the user will be required to correct the interference at his own 
expense. 

 

FCC: Canadian Notice 

FCC Approval for Canada 

This equipment does not exceed the Class A limits for radiated emissions 
as described in the Radio Interference Regulations of the Canadian 
Department of Communications. 

 

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Summary of Contents for C9900-P223


















Reviews: