Beckhoff AMI8100, Operating Instructions Manual

Page: 41 / 61

Mechanical installation
Version: 1.0 ─── 41 AMI8100
Carry out all work with great care and without time pressure.
8.1
Flange mounting
The following table provides information on components for mount-
ing the servo drive on the machine or plant:
Quality of the cheese-head screw DIN EN ISO 4762 = 8.8
Motor Bore diameter [mm] Screw size Tightening torque
[Nm]
Washer DIN
AMI812x 5.5 M5 x 16 5.5 5.3; DIN 7980
8.2
Output elements
WARNING
Secure moving parts against ejection
Make sure there are no moving parts on or in the machine during
operation. Feather keys [+] are only secured during transport.
Unsecured parts can be ejected from the machine during opera-
tion and cause serious or fatal injuries.
Protect servo drive from impermissible stresses
Avoid bending components during transport or handling and do not
change any insulation distances. Avoid hard shocks to the shaft
end, the ball bearings or the feedback system. Furthermore, note
vibration qualities and vibration resistance. If necessary, provide
additional support for the servo drive.
An impermissible load on the components can have a negative ef-
fect on the performance of the servo drive. Impacts on the shaft im-
pair the concentricity of the servo drive.
Ensure adequate grounding via the protective conductor
The thermal connection of the flange determines the power loss.
Ensure adequate grounding via the protective conductor or the
flange.