6
6
ATTENTION CUSTOMER: STATEMENT OF LIMITED WARRANTY
Beckett warrants to the original purchaser only, the “DP” series pond pump and accessories against defects in material and
workmanship as follows:
1) Beckett warrants to the original purchaser, the “DP” series pond pump and accessories (Exception - does not include the
rotor/impeller assembly or replaceable intake filter material - see Item 2 for warranty on these items) against defects in
material and workmanship for 2 years from the date of purchase.
2) Beckett warrants to the original purchaser, the rotor/impeller assembly against defects in material and workmanship for
1 year from the date of purchase. There is no warranty on the replaceable intake filter material as this is considered an
expendable item.
3) Original Purchaser must retain proof of such purchase in the form of a store sales receipt and must produce such upon re-
quest by customer service representative at 1-866-466-4319. Do not return product to place of purchase; contact Beckett
customer service at 1-866-466-4319 and a knowledgeable customer service representative will assist you in resolving the
problem and arrange replacement of the defective parts as needed.
If the product is found to have been consumer damaged or abused, it is not covered by the limited warranty. If this is the
case, you will be advised of the cost of replacement part(s), or the need to return damaged part(s) for warranty replacement.
Altering the power cord or plug will void any warranty considerations. Damage or injuries resulting from negligence, misuse
or failure to follow the safety instructions of this product are not covered by warranty.
6.
LARGE WATER COURSE/STREAM:
These are normally molded plastic and may be provided with a rock looking
texture for a more natural look. Some of these are multi-leveled to add emphasis to the water flow. Installation is fairly
simple and attach to your existing pond pump with a vinyl hose. Sizes vary from 12” to 48” in length and may be purchased
in many different forms and shapes.
7.
SKIMMER SYSTEM:
A pond skimmer is an excellent addition to a pond, they keep ponds looking clean and keep de-
bris off the water surface. When debris is allowed to stay on the surface it will eventually sink, decay and cause unwanted
elements and gases in your pond of which can become hazardous and unsafe to your water plants and fish. Skimmers
are often used together with a Water Fall placed at the opposite end of the pond to generate water circulation and good
pond cleaning. Skimmers are usually buried to a set water surface level and attach to the pond liner so they require some
knowledge and skills to install them properly.
8.
MEDIUM/LARGE WATER FALL:
These are normally molded plastic and come in different sizes and configurations.
Consumers who install these also install skimmer filter systems. These are installed on liner type ponds and use a dedi-
cated pond pump to power this type of water feature. These are more involved to install and blend into the pond environ-
ment. These systems require some knowledge and ability to install.
9.
LARGE FOUNTAIN ART:
Normally found as a cast resin figurine that attaches to your existing pond pump with a vinyl
hose and provides a secondary water feature by returning water back into the pond as an accent type feature. These are
larger than spitters and also provide an art type feature to your pond. These come in many varieties, forms and shapes
which may be 12 to 18 inches tall.
POND ACCENT ACCESSORIES:
10.
POND LIGHTS:
Add interest, emphasis, dimension and depth to your pond and water features. Low voltage pond
lights provide an enchanting nighttime gathering place at your pond by providing light to accent the water features, pond,
plants, fish and the surrounding pond area.
11.
PLANT BASKETS:
Are inexpensive molded plastic baskets that are specifically designed for pond plants. They allow
water and nutrients to pass thru while keeping the roots contained within the basket.
