Beckett DP800 Manual Download Page 2

2

2

After carefully reading all the safety information and instructions, begin assembling your pump as shown 
below. Make sure both Intake Filters (A) are pushed all the way onto the Strainers (B). Next push them 
onto the T-Filtting (C). Now push the T-Filtting (C) onto the Pump Volute Intake (D) [On the DP800 model 
you must install T- Fitting Adaptor (E) into T-Fitting (C) before installing onto pump volute (D)] making 
sure the filters are parallel/flat with the Pump base. Next attach your hose for your water feature to the 
Pump Volute Outlet as shown below; on the DP800 and DP1200 you need to install the 1” Hose Adaptor 
(F) before installing hose.

Assembly

and Operation

Instructions:

PUMP INSTALLATION:

Place your pump into the pond making sure it is in a stable location. Lay out the power cord to your 
properly grounded receptacle protected by a ground-fault circuit-interrupter (GFCI). Plug in the pow-
er cord and check pump for proper operation. After you have everything working to your satisfac-
tion, you can cover up/hide power cord.  You may now enjoy your pond. You may want to review the 
versatility/add on accessories section of the instructions to familiarize yourself with what you can 
accomplish with your new pump system.

PREFILTER CLEANING:

When you see a reduced flow from your pump, it is time to clean the filters. Turn off the power to the 
pump - remove the filters - wash the filters in clean water and reinstall on pump - turn the pump back 
on and check for proper operation. Having spare filters will make this task more convenient. 

2

DP800

 A

 A

 B

 B

 C

 D

D1200

DP1800

Attach 1” I.D. 
hose here

Attach 1” I.D. 
hose here

Attach 1-1/2” I.D. 
hose here

Should you encounter any problems or need replacement parts, contact the Customer Service Representative/Parts Department at 

1-866-466-4319 from 8 AM to 5 PM Mon. thru Fri. EST.  Extended operating days and hours during peak season requirements.

NOTE: Hose and
          hose clamps
          are not included.
          You may purchase
          these items where 
          you purchased your 
          pond pump.

 A

 A

 B

 B

 C

 D

 E

 F

 F

 A

 A

 B

 B

 C

 D

Summary of Contents for DP800







Reviews: