5
5
POND ACCESSORIES:
1.
BIO-FILTER,
Inline Type:
Bio-Filters provide mechanical and biological pond filtration for a cleaner and healthier pond
environment. They efficiently process waste and clarify the pond water as well as reducing ammonia, nitrates and nitrites
in the pond by promoting rapid growth of beneficial bacteria. Bio-filters provide more efficient filtration of the pond water
as compared to just a mechanical type filter. Bio-filters provide a clean, healthy pond ecosystem that is ideal for ponds
with fish.
2.
PRE-BIO-FILTER
, Pond Pump Intake:
This type of bio-filter attaches to the pond pump intake and offers the con-
sumer these additional benefits over inline type bio-filter systems. A compact design that is completely submersible in
the pond, greater filter surface area with easy to service filter material, superior ability to be camouflaged into the pond
setting environment and does not offer the opportunity to leak water from the pond that inline types do because of hose
connections and seals.
3.
UV CLARIFIER
, Inline Type:
UV Clarifiers emit germicidal ultraviolet light thru the bulb to help clarify green water
associated with free-floating algae as well as providing a healthier pond environment with increased water clarity. The UV
light bulb and quartz sleeve eradicate single-celled algae, harmful microorganisms and other pond water contaminants.
4.
BIO-FILTER with UV CLARIFIER
, Inline:
Provides the benefits of a bio-filter while also providing the additional
benefits of a UV clarifier in a single package; see bio-filter and UV clarifier listed above for benefits.
WATER FEATURES:
5.
UNIVERSAL FOUNTAIN KIT:
This kit provides you a choice of three different fountain nozzle adaptors; a (Water-
bell, Bubbler, and Spray Head) as well as allowing you to run a small to medium water feature at the same time from the
two-way valve. The fountain kit is not only ornamentally enjoyable it is also beneficial in aeration, and for movement of
the pond water creating a healthier plant and fish environment. Can be used with DP800 & DP1200 pumps only, you must
remove the 1” hose adaptor before installing. Using the fountain kit with your DP800 or DP1200 pumps will still allow you
to power a medium size water feature thru the two-way valve using 3/4” ID hose.
NOZZLE ADAPTOR INSTRUCTIONS:
Spray Head:
Snaps on the fountain body - has 19 streams of water - use flow
control to adjust height/size of spray - lower the spray height during windy con-
ditions for better control of the spray.
Bubbler:
Inserts into the fountain body until the ribs bottom out - provides a tube of water
mixed with air - use flow control to adjust height/size of spray - great for hot months when fish
need extra oxygen due to increased water temperature.
Waterbell:
Inserts into fountain body until it bottoms out then pull the waterbell up
about 1/4” - moving waterbell deeper into fountain will make spray thinner- adjust
the thickness of the waterbell spray by moving the water bell up and down in the
fountain body - adjust the size/diameter of spray with the flow control - waterbell
spray may be affected by windy conditions, adjust as necessary.
TWO-WAY VALVE OPERATION INSTRUCTION:
Secondary accessory/water
feature with 3/8”, 1/2” or
3/4” diameter vinyl
hose connect
here
This setup shows both of the valves in the
full-flow (open) position
Rotate Valve Insert clockwise,
as shown, to restrict flow to
the accessories, but maintain
flow through the fountain
Rotate both the Valve Body and the
Valve Insert 90° clockwise to shut off
flow to both the fountain and the
accessories
Rotate the Valve Body clockwise,
as shown, to restrict flow to the
fountain, but maintain flow through
the accessories
Extension tubes attach here
Should you encounter any problems or need replacement parts, contact the Customer Service Representative/Parts Department at
1-866-466-4319 from 8 AM to 5 PM Mon. thru Fri. EST. Extended operating days and hours during peak season requirements.
