Becker P9/16PS, Assemble And Operating Instructions, Page: 5 / 16

5
1
2
3
Attention
Drives from Becker Antriebe are to be mounted and operated
solely with mechanical accessory components shown in the
current Becker product catalogue.
The assembler must check in advance that the resistance of the brickwork or
sunshade system meets requirements (torque of the drive plus weight of the
shutter curtain).
Caution
Electrical connections may only be carried out by a qualified
electrician. Prior to assembly, the power supply should be
disconnected. Please give the enclosed connection informa-
tion to the electrical fitter carrying out the work.
1. Establish the room required at the side for mounting (M) of the head piece,
thrust bracket and motor bracket (Fig. 1), in order to calculate the required
length of roller tube. The internal dimension of the roller shutter box or
sunshade system (X) minus the overall length of wall head piece
(M) and thrust bracket (T) gives the length (L) of the roller tube:
L=X-(T+M) (Fig. 2).
Measure the distance from the wall bracket and connecting head since
this can vary according to the combination of motor and bracket.
2. Then fix wall and thrust bracket.
Please observe the following when assembling the drive:
• Assembly of the drive adapter with locking device:
You can see how to insert the locking device from its shape. When insert-
ing the locking device, ensure that the catch locks into place. You will hear
a click. Check that the locking device is in position properly by pulling on
the drive adapter (Fig. 3).
Intended use
Tubular drives of the types P3/30PS - P9/16PS are designed for operating awnings, screens and winter garden shades only.
Use in coupled systems is only possible if all subsystems are fully synchronised and reach the end limits at the same time.
Other applications, utilisation and modifications are not permitted in order to protect the safety of the users and others, since
these actions can impair the system’s safety, resulting in personal injuries and property damage. Becker-Antriebe shall not
accept liability for damages arising from such actions. Always observe the information in these instructions when operating or
repairing the system. Becker-Antriebe shall not accept liability for damages resulting from incorrect usage.
Mounting and installation instructions
Drive adapter with locking device
4
3. Before fitting in the barrel, take the measurement from barrel end to the
centre of the drive adapter and mark on the barrel (Fig. 4).