Becker Highspeed 7934 Operating Instructions Manual Download

Page: 71 / 85

Music operations

Setting volume

A volume bar indicates the current
volume in relation to the overall volume.
You can increase or decrease the volume
by pressing the

buttons.

Navigation during MP3 player opera-
tion

You can start or continue an active navi-
gation while the MP3 player is playing
music.

Press the card symbol on the lower
right-hand edge of the screen for this
purpose.

The map view is displayed while the
music continues to play.

Shutting down the MP3-Player

Press the back key to shut down the
MP3-Player. The main menu appears.

Warning.

Always adjust the volume so that you
can still hear any ambient noise while
driving.

7010

7014

7001

Note:

Bear in mind that music will continue to
play when you exit the MP3 menu.
Press the pause icon to stop music play-
back (See “Pause” on page 68.).

Summary of Contents for Highspeed 7934






















































































Search results

Summary of Contents for Highspeed 7934

Reviews:

Related manuals for Highspeed 7934

Brands by name

Popular brands

Becker Highspeed 7934, Operating Instructions Manual

Search results

Summary of Contents for Highspeed 7934

Reviews:

Related manuals for Highspeed 7934

Brands by name

Popular brands