38
Navigational mode
Selecting the town
The destination town can be entered using
its name or postcode. During this pro-
cess, when each letter is entered a pos-
sible town is displayed and/or when each
character is entered, a possible postcode
is displayed. Traffic Assist Highspeed
rules out all impossible combinations of
letters and postcodes and only activates
those boxes of letters and/or characters
which will produce an existing town
and/or postcode.
!
Press the town and/or postcode.
!
Enter the letters of the destination
town and/or the letters/numbers of the
postcode one after another.
The OK key
The
OK
key can be used to transfer the
destination selected into the route calcu-
lation menu. If the destination required
appears in the upper edge of the display
once the first letters or numbers
have been entered, you can transfer the
destination immediately with
OK
without
using the list function.
!
Press the
OK
key to transfer your des-
tination into the route calculation me-
nu.
Using the list of towns
If you have already entered some of the
letters of the town you want, you can use
the
List
function to display all the towns
containing the combination of letters in
question.
!
Press the
key on the bottom
edge of the screen to call up the list of
towns.
!
A town is selected by pressing the cor-
responding button.
6006
Note:
If necessary, you can switch off the
smart speller in the navigation settings.
It should also be noted that in southern
countries (e.g. Italy), the "prefix" (e.g.
via Gran Mundo) needs to be entered
afterwards (e.g. Gran Mundo_via).
Note:
If two words have to be entered, these
should be separated by a "_" character.
6047
5021
Summary of Contents for Highspeed 7934
Page 1: ...Operating instructions GB ...
