Becker Centronic / B-Tronic EasyControl EC715, Assembly And Operating Instructions Manual

Page: 46 / 144

Programming the transmitter
Putting the receiver into programming mode
Follow the Assembly and Operating Instructions for the re-
ceiver.
•
Switch off the power supply to the receiver for 5 seconds, then switch it
back on.
or
•
Operate the programming button or the radio switch of the receiver.
The receiver is now in programming mode for 3 minutes.
Programming the master transmitter
The master transmitter refers to the very first transmitter
programmed in a receiver. In contrast to subsequently pro-
grammed transmitters, the master transmitter enables,
among other things, the setting of limit positions (for drives
with integrated radio receiver) and the programming or de-
leting of further transmitters. Any transmitter that has separ-
ate UP, STOP, DOWN buttons and a programming button can
be a master transmitter.
If a transmitter is already programmed in the receiver, press
the programming button of the transmitter for 10 seconds.
3s
Press the programming button of the transmitter
for 3 seconds whilst in programming mode.
▻ The receiver confirms.
►
Programming is now complete.
46 - en