Becker Beck-o-Tronic 4 Assembly And Operating Instructions Manual Download Page 3

Page: 3 / 20

Contents

General

This control unit is a high-quality product with many features and advantages:

▪

simple, convenient connection

▪

easy to handle and highly flexible

▪

automatic limit position detection

▪

defined buttons for UP, STOP and DOWN, also on the hand-held transmitter

▪

modular system thanks to plug-in radio and sensors

▪

design with clear display of operating status and error messages

▪

optical safety edge connectable without external sensor

Please observe these Assembly and Operating Instructions when installing and setting
the equipment.

Caution

Denotes a potentially hazardous situation. If this is not
avoided, injuries may result.

Attention

Denotes a potentially hazardous situation. If this is not
avoided, the product or something in its vicinity may be
damaged.

Note

Denotes user tips and other useful information.

Summary of Contents for Beck-o-Tronic 4





















Search results

Summary of Contents for Beck-o-Tronic 4

Reviews:

Related manuals for Beck-o-Tronic 4

Brands by name

Popular brands

Becker Beck-o-Tronic 4, Assembly And Operating Instructions Manual

Search results

Summary of Contents for Beck-o-Tronic 4

Reviews:

Related manuals for Beck-o-Tronic 4

Brands by name

Popular brands