Safety instructions
The following safety instructions and warnings are intended to avert hazards and to
prevent property damage and personal injury.
Please keep the instruction manual safe!
Caution
▪
Work on the electrical equipment may only be carried out by a quali‐
fied electrician.
▪
Ensure compliance with legal provisions (safety, accident preven‐
tion), in particular the provisions of the employers’ liability insur‐
ance associations (BGR 232) and EN 12453 “Safety in use of power
operated doors” as well as the pertinent VDE and EN standards.
▪
The engineer responsible for fitting the system must ensure proper
installation, instruction of the operator in its use and issue of the CE
mark.
▪
The operator must ensure that the system is only operated in per‐
fect condition and that the safety devices are checked regularly by
an expert to ensure they are in full working order.
▪
A damaged mains connecting cable must be replaced immediately
by a qualified electrician.
▪
When using roller doors, the customer must ensure that the roller
shutter curtain is protected and cannot cause any dangerous situa‐
tions, e.g. by overrunning a limit position.
▪
The control unit is designed to have a service life of 100,000 operat‐
ing cycles.
▪
Drives with a H05VV-F connecting cable may only be used indoors. If
the cable is installed outdoors, it must be placed in a protective
conduit.
5
Summary of Contents for Beck-o-Tronic 4
Page 19: ...Declaration of conformity 19 ...
Page 20: ...4005 630 034 0 30 01 2013 ...
