Becker Active 50 Operating Manual Download

Page: 118 / 145

118

>>>

TELEPHONE MODE

> D

> GB

> F

> I

> PL

Bluetooth name

With this function, you can assign a
name for your Navigation device. This
assigned name will then be displayed by
other Bluetooth devices.

In the settings menu, press the

Bluetooth name

button.

Enter the desired name.

Confirm the name entered by pressing
the

button.

Text message notification (depending
on the model)

With this function you can set how the
Navigation device should respond when
a new text message is received.

In the settings menu, press the

SMS

signal

button.

Choose the required setting.

•

No signal

No notification is given.

•

Play tone only

A signal tone will sound.

•

Show popup

A menu is displayed in which you can
select whether the message should be
displayed, read out or ignored. See
"Incoming text message" on page 108.

•

Read out automatically

An incoming text message will be read
out automatically.

Confirm your settings by pressing the
back button

Note:

The message can only be read out if a
voice tagged with the abbreviation TTS
has been selected. See "Setting the
Voice" on page 77.

Summary of Contents for Active 50


















































































































































Search results

Summary of Contents for Active 50

Reviews:

Related manuals for Active 50

Brands by name

Popular brands

Becker Active 50, Operating Manual

Search results

Summary of Contents for Active 50

Reviews:

Related manuals for Active 50

Brands by name

Popular brands