11
EN
Steam Generator Iron | Centro de Planchado | Ferro com Caldeira
2. Press the button (2) to switch the appliance on.The indicator light (2)
will flash indicating that the appliance is heating up.
3. When the iron is ready to use, the indicator light (2) will remain
permanently lit. Two beeps will be heard.
3. Ironing
1. Press the steam release button (12) for ironing with steam.
Important:
During first use:
Press the steam release button for 40 seconds until
steam comes out.
During the first seconds of use the amount of steam will be lower and it
will increase progressively.
Drops of water may leak out while there is still air in the circuit.
Warning:
Ironing with an excessive amount of steam may produce
condensation of the hot water and dripping from the ironing board or
through any other permeable surface.
“Steam Turbo Shot” function
This appliance has a special function for tackling difficult creases.
1. Press the steam release button (12) two times in quick succession
(double-click). Powerful shots of steam will be released.
Vertical steam
Can be used to remove creases from hanging clothes, curtains, etc.
1. Hold the iron in an upright position 15 cm away from the garment to
be steamed.
2. Press the steam release button (12) repeatedly with pauses of at least
5 seconds.
Warning:
Never point the steam jet at garments being worn, or at
people or animals.
AF BECKEN manual ferro_caldeira SKU7158119 BSS5261 A5 3JUL.indd 11
AF BECKEN manual ferro_caldeira SKU7158119 BSS5261 A5 3JUL.indd 11
03/07/2020 16:21
03/07/2020 16:21
