IPC@CHIP SC2x3
Hardware Manual V1.02 [01.03.09]
©2000-2009 BECK IPC GmbH
Page 42
11 History
Revision Date
Author
Comments
V0.90
12.03.09
M.Nesseldreher
Initial version
V0.91
03.04.09
Chapter 5.4 Mutal Exclusive Functions for PSC3, added
PIOs
27.05.09
Chapter 3 Added components to block diagram
27.10.09
Added chapter 6.1.4
27.10.09
Added Codec Modi for PSC1,2 and 6
1.00
25.11.09
Chapter 4.11 MII Interface, wrong RXER pin number
1.01
15.12.09
Chapter ―Interrupts‖ added.
Pullup/down values added.
11.03.10
changed hole size in figure 4-1
© 2000-2009 BECK IPC GmbH
All rights reserved. No part
of this document may be copied or reproduced in any form or by
any means without the prior written consent of BECK IPC
GmbH. The information in this document is subject to change
without notice. Devices sold by BECK IPC GmbH. Are covered
by warranty and patent indemnification provisions appearing in
BECK IPC GmbH. Terms and Conditions of Sale only. BECK
IPC
GmbH
MAKES
NO
WARRANTY,
EXPRESS,
STATUTORY, IMPLIED OR BY DESCRIPTION, REGARDING
THE INFORMATION SET FORTH HEREIN OR REGARDING
THE FREEDOM OF THE DESCRIBED DEVICES FROM
INTELLECTUAL PROPERTY INFRINGEMENT. BECK IPC
GmbH MAKES NO WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PURPOSE.
BECK IPC GmbH Shall not is responsible for any errors that
may appear in this document. BECK IPC GmbH makes no
commitment to update or keep current the information
contained in this document.
Life critical applications
— These products are not designed for
use in life support appliances, aeronautical applications or
devices or systems where malfunction of these products can
reasonably be expected to result in personal injury.
Right to make changes
— BECK IPC GmbH reserves the right
to make changes, without notice, in the products, including
software, described or contained herein in order to improve
design and/or performance. Beck IPC GmbH assumes no
responsibility or liability for the use of any of these products.
