com
.
tom
INDUSTRY 100.DIO8.UMTS
Start-up Guide
The CTI 100.DIO8.UMTS devices communicate with the com.tom
PORTAL via UMTS modem or Ethernet. The communication mech-
anism has a low data volume and can be integrated easily in exist-
ing network infrastructures.
The device may be put into service and
operated by qualified personnel only.
The device is designed for an installation on a
grounded 35 mm DIN rail in dry rooms.
The power supply of the device must be a
grounded circuit PELV (connection between
functional earth and ground). The power
supply must be a limited power source ac-
cording to the EN60950-1 chap. 2.5 or must
be provided with an anti-surge fuse of 2 A.
Insert the SIM card in the device’s rear before the installation on the
DIN rail. The device must be deactivated through this process.
Never use the device in areas where the operation of wireless
equipment is prohibited. The adherence of the protection against
the lightning norm VDE V 0185 is mandatory when installing the
antenna outside. The E.M.C lightning zone concept must be con-
sidered. The device must be deactivated while working with the
antenna.
Pin Assignment
Power Supply
PIN
Description
FE
Functional earth
GND
Ground
VCC
24 VDC
Serial Interface (COM)
Pin
RS232
RS485
Pin 1
COM_ GND
COM_ GND
Pin 2
CTS
-
Pin 3
-
B (+/Z)
Pin 4
Tx
-
Pin 5
-
A (-/Y)
Pin 6
RTS
-
Pin 7
-
TERM_120
Pin 8
Rx
-
CAN Interface
Pin
Description
Pin 1
CAN_HIGH
Pin 2
TERM_120
Pin 3
CAN_LOW
Pin 4
CAN_GND
Ethernet Interface
Yellow LED
Link indication
Green LED
Activity indication
Digital I/Os
Signal
Description
+
24 VDC
I 0
Digital input 0
I 1
Digital input 1
I 2
Digital input 2
I 3
Digital input 3
Q 0
Digital output 0
Q 1
Digital output 1
Q 2
Digital output 2
Q 3
Digital output 3
-
Ground
Status LEDs
PLC
PLC status
Portal
Portal status
GSM
Modem status
LED 4
Freely programmable
Power
Device is powered
Other Interfaces
SD card interface
microSD card
USB interface
Micro USB (OTG Host & Slave)
SIM card interface
Mini SIM (2FF)
Antenna interface
SMA connector (female)
Getting Started
Wire the com.tom device according to the technical data. Get
the
appropriate
Getting Started
documentation
at
http://www.com-tom.de/start and follow the steps described
there to put your device into operation.
Part Numbers
00571155 (WEB-PLC)
CTI 100.DIO8.UMTS.W
00571261 (CODESYS)
CTI 100.DIO8.UMTS.C
General Data
Size (W x L x H)
46 x 103 x 63 mm
Operating temperature
0 bis 55 °C
Electrical shock
Class III
Protection rating
IP20
EMC emission
IEC 61000-6-3
EMC immunity
IEC 61000-6-2
Compliance
CE, RoHS
Electrical Data
Supply voltage
24 VDC (
15 %)
Active current
< 140 mA
Scope of supply
1 Piece
CTI 100.DIO8.UMTS
1 Piece
microSD card
1 Piece
Start-up guide
1 Piece
Connector 3-pin
1 Piece
Connector 8-pin
1 Piece
Connector 4-pin
1 Piece
Connector 10-pin
1 Piece
Label MAC-ID
Copyright © 2018 Beck IPC GmbH
http://www.com-tom.de
