Installing Devices
Repeaters______________________________________________________________________
Repeater layout has been preconfigured by your sales engineer. Please install the repeaters according
to floor plans provided to you. If there are any questions, call Systems Technologies before proceeding.
Installing Low Power Repeaters (VL135LP-B7):
1. Attach small black antenna to the top of the repeater.
2. Plug in orange plastic terminal black to bottom of the repeater.
3. If your repeater is a battery backup model (VL135LPB-B7), the orange connecter should have a
small jumper (see right) next to the input power wires.
4. Attach the other end of power wires to the TP1220 transformer. It does not matter which wire
goes where.
5. Plug into wall outlet. The red power LED on the bottom panel will illuminate.
6. Repeater will initialize by temporarily illuminating all three red LED on the bottom panel.
7. Repeater is now ready to be programmed into the MV200Z console.
NOTE: All types of repeaters have a
maximum 75 ft.-radius coverage
area. These repeaters need to be
spaced no more than 150 ft. from
other repeating/receiving units.
Summary of Contents for MV200Z
Page 9: ...Attention Button...
