Device Configuration
Access Management
– Packet Filter (IP & MAC Filter)
86
BEC MX-200Ae User Manual
IPv4
Source IP Address:
The source IP address of packets to be monitored. 0.0.0.0 means
“Don’t
care”.
Source Subnet Mask:
Enter the subnet mask of the source network.
Source Port Number:
The source port number of packets to be monitored. 0 means
“Don’t
care
”.
Destination IP Address:
The destination IP address of packets to be monitored. 0.0.0.0
means “Don’t care”.
Destination Subnet Mask:
Enter the subnet mask of the destination network.
Destination Port Number:
This is the Port that defines the application. (E.g. HTTP is port 80.)
DSCP:
DSCP: Differentiated Services Code Point, it is recommended that this option be
configured by an advanced user or keep 0. (0 means Don’t care.)
Protocol:
Specify the packet type (TCP, UDP, ICMP, and ICMPv6) that the rule applies to.
IPv6
Source IP (IPv6) Address/ Prefix:
The source IP address or range of packets to be monitored.
Source Port Number:
The source port number of packets to be monitored.
Destination IP (IPv6) Address/ Prefix:
The destination subnet IP address.
Destination Port Number:
This is the Port or Port Ranges that defines the application.
DSCP:
show the set DSCP.
Protocol:
It is the packet protocol type used by the application. Select either
TCP
or
UDP
or
ICMP or ICMPv6
