Device Configuration
Advanced Setup
– Static QoS
70
BEC MX-200Ae User Manual
network.
Application:
Assign a name that identifies the new QoS application rule. Select from the list
box for quick setup.
Direction:
Shows the direction mode of the QoS application
Protocol:
Select a protocol from the drop-down list
DSCP Marking:
Differentiated Services Code Point (DSCP), it is the first 6 bits in the ToS byte.
DSCP Marking allows users to classify the traffic of the application to be executed according to
the DSCP value.
Rate Type:
Choose
Limited
(Maximum) or
Guaranteed
(Minimum) to specify the date rate is allowed
for this policy.
Rate:
Specify the date rate in Kbps.
Priority:
Set
the priority given to each policy/application.
Specify the priority for the use of
bandwidth. You can specify which application can have higher priority to acquire the bandwidth.
Its default setting is set to High. You may adjust this setting to fit your policy / application.
Internal IP Address:
The IP address values for Local LAN devices you want to give control.
Internal Port:
The Port number on the LAN side, it is used to identify an application.
External IP Address:
The IP address on remote / WAN side.
External Port:
The Port number on the remote / WAN side.
Click
Save
to apply settings.
To Remove a Policy
: Simply select the Index then hit the
Delete
button to remove from the list.
