Wheel Assembly
Place the walker on a stable
and even surface. Insert the
four caster stems into the
four plastic holes of the
lower base (fig 1)
Back of Seat Unit
Insert the plastic support into the
fabric seat. Use the Loop found in
the middle of the fabric seat to
secure the seat to the back
support. then push the five plastic
pins on the back of the cushion
into the pin holes found on the top
of the tray. When the pins are fully
inserted use the plastic bolts
provided to secure the seat onto
the frame of the walker (fig 2)
Insert the plastic support into the
fabric seat. Use the Loop found in
the middle of the fabric seat to
secure the seat to the back
support. then push the five plastic
pins on the back of the cushion
into the pin holes found on the top
of the tray. When the pins are fully
inserted use the plastic bolts
provided to secure the seat onto
the frame of the walker.
Music Tray Installation
Before you install the music tray
you must insert 2 x 1.5V AA
batteries. Open the battery cover
located on the back of the music
tray and insert the batteries
ensuring the polarity is correct.
then place the toy on top of the
tray into the slot. Secure the music
tray by attaching the toggles to
the underside and turning 90˚ (fig
3)
Figure 2
