6
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Change Table...
1
2
3
Lay one end panel on its side and place the
bottom shelf in position.
Ensure the shelf correctly fits into the groove on
the headboard.
Secure with two x 32mm bolts.
Repeat for middle shelf.
Attach one top side rail to the end panel with two x
32mm bolts and 1 x Dowel.
Ensure the grooves on the side rail are facing inwards
and towards the bottom.
Attach the two top rails to the end panel with two x 32mm
bolts.
Repeat for the remaining top side rail.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the change table is
assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the change table is not scratched during assembly.
1a.
1b.
1c.
2a.
a.
b.
c.
d.
3a.
3b.
3c.
3d.
4
Carefully lay the change table down with the shelves
standing up.
Insert remaining 2 x Dowels into the ends of the top side
rails.
4a.
4b.
