7
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Change Table continued...
4
6
5
7
Insert the top shelf by sliding it in the grooves on
the top shelf rails and into the groove in the end
panel.
Attach two x feet to one footboard panel using
4 x 32mm bolts.
Ensure that the legs are angled out and away
from the centre of the footboard and that the bolt
holes that are recessed are on the opposite side
of the attached foot.
Repeat step 6b. for remaining 1 x footboard
panel and 2 x feet.
Place the remaining end panel onto the shelves
making sure each shelf sits in the end panel
grooves correctly.
When the end panel is in position, secure with
the remaining eight x 32mm bolts.
Carefully lay the change table down on its top
side with the base facing upward.
Attach one x footboard assembly to one end of
the underside of the change table using 4 x
32mm bolts.
Repeat step 7b. for the remaining footboard
assembly.
4c.
6a.
6b.
6c.
5a.
5c.
7a.
7b.
7c.
WARINING:
Do not over-tighten bolts
WARINING:
Do not over-tighten bolts
