6
7
Removing/Attaching the Spacer
• To remove the spacer, hold the shaver with one hand,
grab the spacer, put your thumb on the edge of the
spacer, pull the spacer forward, and remove it.
Pull to open
Thick
Thin
Regulator
• To attach the spacer, place it on the cutting head and
press it firmly. Make sure the two small tabs on the
spacer grip into the two recesses on the shaver.
Pull to open
Thick
Thin
Regulator
• To protect the shaver foil, you should remove the
spacer and place the protective cap on the shaver foil
when not using the fabric shaver.
Replacing the Cutting Blades
1. To remove the cutting blades - Unscrew the shaver
foil, carefully grasp the cutting blades’ edge and pull
them out, avoiding damage to the blades.
2. To attach the cutting blades - Grasp the cutting blades’
edge and firmly insert the cutting blades into shaver
body. Finally, screw the shaver foil back into place.
Warning:
Keep the protective cap in place when
the shaver is not in use to prevent children from
accidentally injuring themselves.
