®
RS34 - RS48 - RS59
BEAST BRIDGE SAWS OPERATING MANUAL
9
spindle. The saw flange is to be mounted
on the saw spindle with a hexagon nut to
clamp the saw blade.
Cutting table
The cutting table is constructed of
removable aluminum components for
easy maintenance, and a stainless steel
adjustable side stop.
Cooling system
The electrical water pump is switched on
simultaneously with the saw motor and
supplies cooling water to both sides of the
saw blade. A drain hole, with a plug, is
located in the water container. Mud flaps
prevent most of the water mist and make
sure most water flows back in the water
container.
UNPACKING & SETTING UP
Unpacking and Assembly
•
Unpack the tile saw and inspect for
any damaged parts.
•
Install the legs in the sockets at the
under side of the water container and
fasten with the knobs. Markings show
the right position.
•
Level the tile saw by adjusting the legs
in the sockets and make sure its stable.
•
Release the transportation lock.
Blade guard
Water pump
Cutting table
Saw spindle
Detachable legs
Technical Data
Type
RS34 RS48 RS59
Capacity
2 HP
2 HP
2 HP
Blade diameter/hole
10”
10”
10”
Cutting height
max. 2”
max. 2”
max. 2”
Saw spindle speed
3.360 RPM
3.360 RPM
3.360 RPM
Cutting length
34”
48”
59”
Length
48” 61” 73”
Width
19” 19” 19”
Height (without legs)
24”
24”
24”
Weight
115 lbs
137 lbs
154 lbs
Noise level
81 dB (A)
81 dB (A)
81 dB (A)
Noise level (sawing)
92 dB (A)
92 dB (A)
92 dB (A)
