RST200 INSTALLATION & USER MANUAL
25
Remote Configuration
The Supervisor Menu items are available for remote configuration via a combination
of the Iridium Short Burst Data and or SMS services. Refer to your Service Provider
on how to register for this service.
To configure your RST remotely you will need to know its Phone Number, Supervisor
PIN and the International Mobile Equipment Identifier or IMEI number.
Multiple configuration commands may be sent in one SMS. The Supervisor PIN is
only required once at the start. Once the PIN has been entered the top of hierarchy
for each subsequent command in the message is the Supervisor menu.
The menu text is suppressed from the reply, but otherwise you enter digits in your
command exactly as you would enter them if you were on a directly connected
terminal.
The replies to all your commands come back in one SBD email attachment. The
original entered command is echoed back so you can see what each reply is for.
For example, to remotely reset the RST send an SMS to the phone number
continuing RST RMT 3170 B
RST RMT is the start of command message flag3170 is the default Supervisor PIN
‘B’ resets the RST.
