Beam RST 973 Installation & User Manual Download Page 38

Page: 38 / 61

RST973 IN-VEHICLE INSTALLATION & USER MANUAL

Activate the Feature Directly

To access the feature directly:

Press MENU,

and then

press

the digit key of the feature.

Scroll to the Feature

To scroll to the feature:

Press

MENU

to scroll through the available features.

Press *

to scroll backward and forward.

Press

to select a feature.

Default Quick Access Settings

Menu Number Quick Access Feature

Find Name searches your Phone Book by the full name.

Check Signal checks the strength of the signal from the satellite

Call Voicemail calls your Voicemail number to check your Voice

Mute Phone mutes the phone.

Lock Now locks your phone immediately.

Adjust Ring

displays and sets the incoming call ring tone volume.

Read Messages displays the newest message received

Register Now initiates a systematic manual search for a network
which to register. You must wait three minutes between registra
attempts.

Forward On/Off activates or deactivates unconditional call forwa
depending on the current setting.

Using The In-Call Menu

This menu lets you access specific features while you are in a call. Because this
menu is not available until you are actually in a call, you cannot review it off-line.

Entering the In-Call Menu

While you are in a call:

Press

MENU

to view the In-Call menu features.

In-Call Menu Features

The In-Call menu dynamically changes depending on the type of call you are in.

Summary of Contents for RST 973






























































Search results

Summary of Contents for RST 973

Reviews:

Related manuals for RST 973

Brands by name

Popular brands

Beam RST 973, Installation & User Manual

Search results

Summary of Contents for RST 973

Reviews:

Related manuals for RST 973

Brands by name

Popular brands