29
SatDOCK 9555 Installation & User Manual
AT Commands
When utilizing the data communication ports (USB and Serial DB9)
the SatDOCK must ensure that users do not enter in AT commands
that could interrupt the SatDOCK’s synchronization with the 9555
handset. Therefore the SatDOCK will block or limit AT commands
that could cause any adverse effects to the functional operation of
the cradle.
The following AT commands are affected:
AT Command
Cradle
State
when
docked
Limitation
AT+IPR
6,0
(default)
Auto-baud is
permanently disabled
with the default baud
rate set to 19200. See
“Using the RS232
Communication Port” for
further information.
ATV0
1
Verbose is permanently
enabled
AT&C0
1
DCD indicates the
connection status
ATQ1
0
Quiet mode not allowed
AT&F0
-
Configures 9555 for
optimal docking
configuration
AT&W1
-
Blocked
AT&Yn
-
Blocked
AT+Key=0
=1
Key press notification is
always on
