IridiTRAK Installation & User Manual
States of IridiTRAK
There are 3 states; Unit will be in one of the state at a time.
1. Tracking Mode. 2. Emergency Mode. 3. Sleep Mode.
Tracking Mode
Occurs When:
a. Unit is not in Emergency
b. Ignition is ON
Messages:
•
Ignition ON
•
Ignition OFF
•
Position Reports
•
Remote polling message with Position Reports
Message Queue:
•
if queue is full higher priority messages will override lower priority
messages.
Emergency
Mode
Occurs When:
a. Emergency button is pressed
b. Man down pendent goes into triggered state.
Messages:
•
Emergency Message with Position Report
•
Ignition ON
•
Ignition OFF
•
Remote polling message with Position Reports
Message Queue:
•
Will override any present message in the queue if message queue is
full.
Sleep Mode
Occurs When:
a. Unit is not in Emergency (
and
USB is disconnected)
b. Ignition is OFF (
and
USB is disconnected)
Messages:
•
No Messages will be sent.
Message Queue:
•
All previously Queued messages will be deleted.
•
X minutes will be given before deleting any messages.
Page 26 of 46
