3. Enter the 4-digit code from the included list for the category and
brand of your device.
The
POWER
button’s red indicator light shuts off, and you will hear a
long beep if a valid code was entered.
If the
POWER
button’s red indicator light flashes and remains on, and
you hear 3 beeps after entering four digits, that means an invalid code
was entered. In that case, check the list again and re-enter the code.
NOTE:
Test the remote with the device to make sure all the buttons work
as expected. If some of the buttons/ features don’t work, try a different code
in the list. Repeat this process for each device you wish to control.
Code list and other helpful information available at:
www.southerntelecom.com/beam
OPTION 2. PROGRAMMING USING THE CODE LIST
If you are having trouble programming your Beam remote
with the app or included code list, please try the manual
programming option shown on the next page.
08
