RR1001 HOSPITALITY UNIVERSAL REMOTE
INSTRUCTION MANUAL
Note: The RR1001 is preprogrammed to control LG & Vizio TVs.
Direct Code Entry Method
1. Press and hold the
SET
and
POWER
buttons simultaneously for 3
seconds;
the indicator light shall remain on; then release the buttons.
2. Enter the 4-digit code corresponding to the brand of your TV. After a
valid code entry, the indicator turns off. For an invalid code, the indicator
flashes 4 times quickly, then exits setup mode.
NOTE:
After entering setup mode, if without pressing any button for 10
seconds, the remote shall quit the setup mode.
Code Search Entry Method
1. Turn on your TV.
2. Press and hold the
SET
and
POWER
buttons simultaneously for 3
seconds; the indicator light shall remain on; then release the buttons.
3. Continuously press and release
CH+
(or
CH-
to go backwards) to scan
through the codes.
4. If the TV is controlled (by changing the channel), press
ENTER
to save
the code.
NOTE:
After entering code setup mode, if without pressing any button for 10
seconds, the remote shall quit the setup mode.
Code Search Entry (Automatic Method)
1. Turn on your TV.
2. Press and hold the
SET
button for 6-7 seconds; the indicator light shall
remain on; then release the button. Now the remote is in the automatic
code searching. Wait.
3. When the TV is controlled (by turning off), press
SET
button to lock in
the code. Your remote is now programmed. Test and make sure all
buttons work properly. If not, repeat from step 1.
Quick Program using Brand Buttons from Chart
1. Turn on your TV.
2. Press and hold the
SET
and the respective TV brand button (
0-9 keys,
Summary of Contents for RR1001
Page 13: ...1329 1330...
