21
BEAGLEBOARD-X15 QUICK START GUIDE
To adjust volume make sure your speakers are connected and the speaker volume is turned to a nominal volume.
The BEAGLEBOARD-X15 volume can be adjusted by clicking on the lower right hand side left of the clock (icon
missing in this example) and adjusting the volume lever up and down.
Figure 25 -
Debian Volume adjustment
Audio In can be similarly tested by using a 3.5mm to 3.5mm audio cable between a PC playing a sound file and the
BEAGLEBOARD-X15 recording it via connector jack P9.
ESATA
To test the eSATA interface you will need a cable and drive as described in
Table 1.
Simply plug in the cable into
connector P6 and the drive will be detected. The connector also accepts a USB 2.0 flash drive or other USB 2.0
devices.
