7
9
ASSEMBLY INSTRUCTIONS
Before using Fire Pit, check for gas leaks.
Perform leak test in a well-ventilated area outside and where no source of spark can occur.
a) After opening door for access, open tank valve fully (counter-clockwise).
b) Turn control knob to the OFF position.
c) Apply soapy water solution (3 drops dish detergent plus 4 oz. water) to check all connections for leaks before attempting to light Fire Pit.
See Figure 9
e) Turn control knob to the ON position. If there are any leaks, soapy water
will bubble where leak is occurring.
WARNING
Keep lava rock/ re glass and
other objects off of screen (shown
at left).
Holes in the screen must be
exposed in order to allow gas to
escape.
Blocked screen can cause gas to build
inside Fire Pit and ultimately cause an
explosion and risk of serious injury.
Screen
Burner
Ring
CORRECT
Burner ring is completely
covered (except for screen).
INCORRECT
Note that the burner ring
is visible.
7a
7c
7c
Screen
7a
7b
8c
7
a)
Place lava rock/fire glass evenly in f ire bowl (A). Use caution when handling f ire glass as it is sharp.
See Figure
7
a
b)
Do not place any lava rock/f ire glass over the screen.
See f igure
7
b
c)
Completely cover the entire burner ring with lava rock/f
ire glass.
See f igure
7
c
Failure to completely cover the burner ring with the lava rock/f ire glass will cause flame to extinguish
occasionally.
1
2
3
4
5
9
