BC-3GM User Manual
Page 7 of 39
[Table 2.1 : LED indicator description on LAN port]
User can connect BC-3GM with Host PC, HUB, Router etc, via 10/100 LAN port. The
RJ-45 connector (LAN port) has two Link-LED. Table below lists out description for
each LED indicator.
2.2.5.
Console
This port is for manufacturer use only. The console is designed mainly for diagnostic
data reading. Normally this port is for debugging.
2.2.6.
Antenna Connector
This connector should be connected to an antenna.
2.2.7.
HSPA Module
This Router supports 3G 800/850/900/1700/1900/2100MHz with upload 384Kbps,
downlink 21.1Mbps and uplink 7.2Mbps. 2G 850/900/1800/1900MHz
2.2.8.
6-Status LED
BC-3GM has 6-Status LED to indicate real-time status.
* The LED position are from left to right on top view
LED
Display
Description
Power
ON
Indicates that main power is on
OFF
Indicates that main power is off
Modem
ON
Recognizes the HSPA modem
OFF
Does not recognize the HSPA modem.
Net
BLINK
Indicates that data exists on 3G wireless network
OFF
Indicates that data does not exist on 3G wireless network
IP
ON
Indicates that cellular IP is received from ISP
OFF
Indicates that cellular IP is not achieved from ISP.
BLINK
Indicates that data exists via 10Mbps LAN.
OFF
Indicates that 10M LAN is disconnected.
Orange
ON
Indicates that 100Mbps LAN is connected.
BLINK
Indicates that data exists via 100Mbps LAN.
OFF
Indicates that 100M LAN is disconnected.
