BC-3GM User Manual
Page 27 of 39
You can see the old log in the system log page. If you enable remote log
You can see logs on the PC for remote troubleshooting or administration.
15)
Click [
Administrator
] then [
System
].
This section is to setup Router system.
Web Access
: Enable web access on port 443. When user needs to login,
Web address should be
https://192.168.0.1/home.asp
Telnet Access
: If Telnet Access is enabled, please specify which port is used
for Telnet. Default is port 23.
NAT
: It is default as NAT router.
SMS Phone Number
: If router received SMS “REBOOT” from registered phone
Numbers, Router will make reboot. It allows to register 3
different cellular phone numbers.
[Picture 6.16: Setting up System menu]
16)
Click [
Administrator
] then [
Upgrade
].
Router can be updated either from local network or remote PC.
Select file
: Point to new firmware location, then click [
Upgrade
].
Router will upgrade to new firmware. During upgrade procedure, please remain
power on all the time until upgrade is complete finished.
