14
5.
Management Software
The system provides a Windows-based Management software
for the system administrator to manage all KV-901T and AV-901R
devices from his/her PC. You should download and install the
below software before installing this Management software.
.Net Framework 2.0 or above
WinPcap 4.1.2,
Downloadable at:
http://www.winpcap.org/install/default.htm
To install, double click SETUP.EXE and follow the setup wizard:
After the installation is finished, you should configure your PC IP
address with the same network segment as all of KV-901T and AV-
901R units. Both of the KV-901T and AV-901R’s factory default
operation IP is shown on the label under the box. For example, if
the KV-901T and AV-901R operation IP is 10.100.1.10 and
10.100.5.70, then you might set your PC IP address as 10.100.1.1
and the subnet mask as 255.0.0.0.
Click “LAN Manager 5.0” icon to start the Management Software: