x
Page 4 of 20
75.0034.03 ULTIMO 20220120
LED SIGNALS
COLORS
BEHAVIORS
(green)
Motion detection
(red)
Presence detection
(white)
IR synchronization
LED flashes
LED flashes quickly
LED is off
LED flashes x times
LED flashes red-green
INSTALLATION
The sensor should be
mounted securely to avoid
extreme vibrations.
Avoid highly reflective
objects in the infrared field.
Avoid moving objects and
light sources in the detection
field.
Do not cover the sensor.
Only trained and qualified
personnel are recommended
for installation and setup of
the sensor.
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
Following installation, always
test for proper operation
(according to ANSI 156.10)
before leaving the premises.
The door control unit and the
header cover profile must be
correctly grounded.
SAFETY
It is recommended to clean the
optical parts at least once a
year or more if required due to
environmental conditions.
Do not use aggressive
products to clean
the optical parts.
MAINTENANCE
READ BEFORE BEGINNING INSTALLATION/PROGRAMMING/SETUP
This device can be expected to comply with Part 15 of the FCC Rules, provided it is assembled in exact accordance with the instructions
provided with this kit. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.