Page 8 of 16
75.5984.01 LZR-H100 20181221
Page 8 of 16
75.5984.01 LZR-H100 20181221
1
1
2
3
IN
LOCK
4
5
6
No test function:
Connect BLUE (DC+) and BLUE/WHITE
(DC-) to power supply.
(no polarity)
RELAY 1 - OPENING FIELD
RELAY 2 - SAFETY FIELD
NOT USED
RED
BLACK
WHITE
GREEN
WHITE/BLACK
GREEN/WHITE
BLUE
BLUE/WHITE
ORANGE
ORANGE/BLACK
TEST +
TEST -
POWER
MOUNTING & WIRING
LED signal at power-on:
Correct positioning is needed
Carefully read the application requirements and tips before mounting the sensor.
Mounting position of the sensor is crucial for proper functioning of the barrier.
Power on without test signal:
Connect blue/white and blue
wires to test or power supply.
No detection
Safety and opening detection
POWER SUPPLY -
Use a mounting post or a mounting
accessory (e.g. LBA accessory) to
secure the sensor to the pole.
Position the bracket and secure
using the 4 screws to avoid
vibrations.
Firmly close the protection cover.
Turn the sensor until the two
triangles are aligned.
Position the housing on the
bracket.
Open the protection cover, plug
the connector and position the
cable in the slit.
