BE WP-1015HT, User Manual

Page: 10 / 21

18
WARNING
Backfire, fire or engine damage could occur.
• DO NOT stop engine by moving choke control to “Choke” position.
Stopping the Water Pump
1. Move engine speed lever to “Slow” position.
2. Push on/off switch to “Off” position.
3. Turn fuel valve to “Off” position.
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump.
3. Remove primer plug from top of pump and flush internal components
of pump with clean water.
4. Replace both plugs and finger tighten.
STOPPING THE WATER PUMP
If you need assistance with the assembly
or operation of your Water Pump please call
1-866-850-6662