background image

6

7

The safety alert symbol (      ) is used with a signal word (DANGER, 

CAUTION, WARNING), a pictorial and/or a safety message to alert you 

to hazards. 

DANGER

 indicates a hazard which, if not avoided, will result in death 

or serious injury. 

WARNING

 indicates a hazard which, if not avoided, could result in 

death or serious injury. 

CAUTION

 indicates a hazard which, if not avoided, might result in 

minor or moderate injury. 

NOTICE

 indicates a situation that could result in equipment damage.

Follow safety messages to avoid or reduce the risk of injury or death.

HAZARD SYMBOLS AND MEANINGS

Save these Instructions

SAFETY RULES

This is the safety alert symbol. It is used 

to alert you to potential personal injury 

hazards. Obey all safety messages that 

follow this symbol to avoid possible 

injury or death.

explosion

kickback

read

 

manual

fire

burning

electric

 

shock

toxic

 

fumes

WARNING

Generator exhaust contains carbon monoxide, a 

poisonous gas that can kill you. 

You CANNOT smell or see this gas.

• Use the generator outdoors, away from open windows, vents, or 

  doors that could allow the carbon monoxide gas to come indoors. 

  Keep the generator at least 1 meter (3 feet) away from any structure   

  or building during use.  

• NEVER use a generator indoors, including in homes, garages, 

  basements, crawl spaces, and other enclosed or partially-enclosed

  areas, even with ventilation. Opening doors and windows or using

  fans will not prevent carbon monoxide build-up in the home.

• NEVER use a generator in enclosed or partially-enclosed spaces.

  Generators can produce high levels of carbon monoxide very quickly.    

  When you use a portable generator, remember that you cannot smell   

  or see carbon monoxide. Even if you can’t smell exhaust fumes, you    

  may still be exposed to carbon monoxide.

• NEVER operate the generator in an explosive atmosphere, near

  combustible materials or where ventilation is not sufficient to carry

  away exhaust fumes. Exhaust fumes can cause serious injury or death.

• If you start to feel sick, dizzy, or weak while using a generator, get

  to fresh air RIGHT AWAY. DO NOT DELAY. The carbon monoxide

  from generators can rapidly lead to full incapacitation and death.

• If you experience serious symptoms, get medical attention 

  immediately. Inform medical staff that carbon monoxide poisoning

  is suspected. If you experienced symptoms while indoors, have 

  someone call the fire department to determine when it is safe to

  re-enter the building.

SAFETY

SAFETY

Summary of Contents for BE-12000ER




















Reviews: